Комментарии Александр Шоренков
Александр Шоренков 10.02.2014 11:34 Есть вопрос! — openwrt openvpn tun client
0
спасибо.
Xmodmap
Теперь скорее всего нужно переназначить номера клавиш мыши.
Выполните в терминале следующую команду, чтобы проверить их соответствие:
Код: [Выделить]
xev
Покликайте в посвившемся окошке всеми кнопками. В консоли должны выводиться номера нажатых клавиш. Левая кнопка должна быть первой, средняя — второй, правая — третьей, колесо вперед — четвертой, колесо назад — пятой, боковая клавиша «назад» — шестой, боковая «вперед» — седьмой.
Так как номера клавиш скорее всего не совпадают, придется переназначить их с помощью утилиты Xmodmap.
Теперь скорее всего нужно переназначить номера клавиш мыши.
Выполните в терминале следующую команду, чтобы проверить их соответствие:
Код: [Выделить]
xev
Покликайте в посвившемся окошке всеми кнопками. В консоли должны выводиться номера нажатых клавиш. Левая кнопка должна быть первой, средняя — второй, правая — третьей, колесо вперед — четвертой, колесо назад — пятой, боковая клавиша «назад» — шестой, боковая «вперед» — седьмой.
Так как номера клавиш скорее всего не совпадают, придется переназначить их с помощью утилиты Xmodmap.
попробовал, все отлично всем спасибо
спасибо буду пробовать
Всем спасибо. Ubuntu сегодня ночью обновил ядро и все стало на свои места. Ничего не падает.
печаль в том, что планка одна.
спасибо, перезагрузился начал проверять, но оно доконца никогда не доходило до финала. Постоянно перезагрузка, но на разных процентах.
memtest
memtest: команда не найдена
memtest: команда не найдена
Chromium пишет ошибку сегментирования....
(nautilus:3641): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed
и да, чет я тупанул, у меня ж Ati
если честно то не знаю, как можно посмотреть?
пока выскакивает Failed to open VDPAU backend libvdpau_nvidia.so: невозможно открыть разделяемый объектный файл: Нет такого файла или каталога
но firefox не падает
но firefox не падает
печально....
нормально он под вайном запускается
все вдруг чудесным образом заработало....
да да я понял :)
спасибо
Вообщем не стоит писать посты в 4 утра :) Я не хотел удалять маршрут, я хотел его добавить.
Добавить маршрут у меня получилось, но он почему-то не работает.
Например, я хочу чтобы сайт 2ip.ru открывался через openvpn туннель.
sudo route add -net 188.40.74.0 netmask 255.255.255.0 gw 10.9.0.9 dev tun0
однако traceroute не может прыгнуть на 2ip.ru. Как это победить?
Добавить маршрут у меня получилось, но он почему-то не работает.
Например, я хочу чтобы сайт 2ip.ru открывался через openvpn туннель.
sudo route add -net 188.40.74.0 netmask 255.255.255.0 gw 10.9.0.9 dev tun0
однако traceroute не может прыгнуть на 2ip.ru. Как это победить?
все спасибо вопрос снят, удаление этих линий решает все проблемы
С AVR Device Explorer разобрался:
нужно удалить следующие линии в файле avr/io.h
#elif defined (__AVR_M3000__)
# include
нужно удалить следующие линии в файле avr/io.h
#elif defined (__AVR_M3000__)
# include
Студия установилась, однако при попытке открыть программатор STK500 аварийно завершалась.
Когда я включил режим отладки появилось окно программатора, но при попытке прочитать параметры кристала выскакивало сообщение об ошибке:
Could not connect programmer.
В 'то время в окне отладки появлялись следующие сообщения:
Когда я включил режим отладки появилось окно программатора, но при попытке прочитать параметры кристала выскакивало сообщение об ошибке:
Could not connect programmer.
В 'то время в окне отладки появлялись следующие сообщения:
А у меня счетчики электрические и устройство сбора данных, перешли :(
вроде мой.
Рано я радовался, опять не работает после перезагрузки......
Спасибо, вроде помогло
Section "InputDevice"
Identifier "evdev mouse"
Driver "evdev"
Option "CorePointer"
Option "Device" "/dev/input/event9"
EndSection
Section "Screen"
Identifier "Default Screen"
DefaultDepth 24
EndSection
Section "Module"
Load "glx"
EndSection
Identifier "evdev mouse"
Driver "evdev"
Option "CorePointer"
Option "Device" "/dev/input/event9"
EndSection
Section "Screen"
Identifier "Default Screen"
DefaultDepth 24
EndSection
Section "Module"
Load "glx"
EndSection
лог dmesg до "перезагрузки usb"
лог после
[ 414.340736] usb 2-1.3: USB disconnect, address 3
[ 415.817033] usb 2-1.3: new low speed USB device using ehci_hcd and address 4
[ 415.952928] input: A4Tech RF USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input12
[ 415.953219] generic-usb 0003:09DA:024F.0003: input,hidraw0: USB HID v1.11 Keyboard [A4Tech RF USB Receiver] on usb-0000:00:1d.0-1.3/input0
[ 415.958910] input: A4Tech RF USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input13
[ 415.959227] generic-usb 0003:09DA:024F.0004: input,hidraw1: USB HID v1.11 Mouse [A4Tech RF USB Receiver] on usb-0000:00:1d.0-1.3/input1
[ 3.533034] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.533049] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.533062] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.533066] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 3.533097] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.533145] ehci_hcd 0000:00:1a.0: debug port 2
[ 3.537053] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 3.537070] ehci_hcd 0000:00:1a.0: irq 16, io mem 0x94105400
[ 3.551879] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 3.552025] hub 1-0:1.0: USB hub found
[ 3.552029] hub 1-0:1.0: 2 ports detected
[ 3.552103] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.552115] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.552119] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 3.552156] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.552202] ehci_hcd 0000:00:1d.0: debug port 2
[ 3.556089] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 3.556104] ehci_hcd 0000:00:1d.0: irq 23, io mem 0x94105000
[ 3.571874] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.572013] hub 2-0:1.0: USB hub found
[ 3.572017] hub 2-0:1.0: 2 ports detected
[ 3.572076] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.572087] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.572158] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[ 3.590636] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.590642] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.590747] mousedev: PS/2 mouse device common for all mice
[ 3.593479] rtc_cmos 00:06: RTC can wake from S4
[ 3.593533] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 3.593564] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 3.593632] device-mapper: uevent: version 1.0.3
[ 3.593702] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: [email protected]
[ 3.593749] device-mapper: multipath: version 1.2.0 loaded
[ 3.593752] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.593812] EISA: Probing bus 0 at eisa.0
[ 3.593814] EISA: Cannot allocate resource for mainboard
[ 3.593816] Cannot allocate resource for EISA slot 1
[ 3.593818] Cannot allocate resource for EISA slot 2
[ 3.593820] Cannot allocate resource for EISA slot 3
[ 3.593821] Cannot allocate resource for EISA slot 4
[ 3.593823] Cannot allocate resource for EISA slot 5
[ 3.593825] Cannot allocate resource for EISA slot 6
[ 3.593826] Cannot allocate resource for EISA slot 7
[ 3.593828] Cannot allocate resource for EISA slot 8
[ 3.593829] EISA: Detected 0 cards.
[ 3.610394] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 3.863868] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 3.996613] hub 1-1:1.0: USB hub found
[ 3.996819] hub 1-1:1.0: 6 ports detected
[ 4.107860] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 4.240551] hub 2-1:1.0: USB hub found
[ 4.240757] hub 2-1:1.0: 8 ports detected
[ 4.311996] usb 1-1.1: new high speed USB device using ehci_hcd and address 3
[ 4.511950] usb 2-1.3: new low speed USB device using ehci_hcd and address 3
[ 5.012956] <30>udev[81]: starting version 167
[ 6.054009] tg3.c:v3.116 (December 3, 2010)
[ 6.054028] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.054040] tg3 0000:02:00.0: setting latency timer to 64
[ 6.087405] input: A4Tech RF USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input5
[ 6.087532] generic-usb 0003:09DA:024F.0001: input,hidraw0: USB HID v1.11 Keyboard [A4Tech RF USB Receiver] on usb-0000:00:1d.0-1.3/input0
[ 6.092915] input: A4Tech RF USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input6
[ 6.093088] generic-usb 0003:09DA:024F.0002: input,hidraw1: USB HID v1.11 Mouse [A4Tech RF USB Receiver] on usb-0000:00:1d.0-1.3/input1
[ 6.093113] usbcore: registered new interface driver usbhid
[ 6.093116] usbhid: USB HID core driver
[ 3.533049] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.533062] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.533066] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 3.533097] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.533145] ehci_hcd 0000:00:1a.0: debug port 2
[ 3.537053] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 3.537070] ehci_hcd 0000:00:1a.0: irq 16, io mem 0x94105400
[ 3.551879] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 3.552025] hub 1-0:1.0: USB hub found
[ 3.552029] hub 1-0:1.0: 2 ports detected
[ 3.552103] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.552115] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.552119] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 3.552156] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.552202] ehci_hcd 0000:00:1d.0: debug port 2
[ 3.556089] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 3.556104] ehci_hcd 0000:00:1d.0: irq 23, io mem 0x94105000
[ 3.571874] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.572013] hub 2-0:1.0: USB hub found
[ 3.572017] hub 2-0:1.0: 2 ports detected
[ 3.572076] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.572087] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.572158] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[ 3.590636] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.590642] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.590747] mousedev: PS/2 mouse device common for all mice
[ 3.593479] rtc_cmos 00:06: RTC can wake from S4
[ 3.593533] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 3.593564] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 3.593632] device-mapper: uevent: version 1.0.3
[ 3.593702] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: [email protected]
[ 3.593749] device-mapper: multipath: version 1.2.0 loaded
[ 3.593752] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.593812] EISA: Probing bus 0 at eisa.0
[ 3.593814] EISA: Cannot allocate resource for mainboard
[ 3.593816] Cannot allocate resource for EISA slot 1
[ 3.593818] Cannot allocate resource for EISA slot 2
[ 3.593820] Cannot allocate resource for EISA slot 3
[ 3.593821] Cannot allocate resource for EISA slot 4
[ 3.593823] Cannot allocate resource for EISA slot 5
[ 3.593825] Cannot allocate resource for EISA slot 6
[ 3.593826] Cannot allocate resource for EISA slot 7
[ 3.593828] Cannot allocate resource for EISA slot 8
[ 3.593829] EISA: Detected 0 cards.
[ 3.610394] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 3.863868] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 3.996613] hub 1-1:1.0: USB hub found
[ 3.996819] hub 1-1:1.0: 6 ports detected
[ 4.107860] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 4.240551] hub 2-1:1.0: USB hub found
[ 4.240757] hub 2-1:1.0: 8 ports detected
[ 4.311996] usb 1-1.1: new high speed USB device using ehci_hcd and address 3
[ 4.511950] usb 2-1.3: new low speed USB device using ehci_hcd and address 3
[ 5.012956] <30>udev[81]: starting version 167
[ 6.054009] tg3.c:v3.116 (December 3, 2010)
[ 6.054028] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.054040] tg3 0000:02:00.0: setting latency timer to 64
[ 6.087405] input: A4Tech RF USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input5
[ 6.087532] generic-usb 0003:09DA:024F.0001: input,hidraw0: USB HID v1.11 Keyboard [A4Tech RF USB Receiver] on usb-0000:00:1d.0-1.3/input0
[ 6.092915] input: A4Tech RF USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input6
[ 6.093088] generic-usb 0003:09DA:024F.0002: input,hidraw1: USB HID v1.11 Mouse [A4Tech RF USB Receiver] on usb-0000:00:1d.0-1.3/input1
[ 6.093113] usbcore: registered new interface driver usbhid
[ 6.093116] usbhid: USB HID core driver
лог после
[ 414.340736] usb 2-1.3: USB disconnect, address 3
[ 415.817033] usb 2-1.3: new low speed USB device using ehci_hcd and address 4
[ 415.952928] input: A4Tech RF USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input12
[ 415.953219] generic-usb 0003:09DA:024F.0003: input,hidraw0: USB HID v1.11 Keyboard [A4Tech RF USB Receiver] on usb-0000:00:1d.0-1.3/input0
[ 415.958910] input: A4Tech RF USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input13
[ 415.959227] generic-usb 0003:09DA:024F.0004: input,hidraw1: USB HID v1.11 Mouse [A4Tech RF USB Receiver] on usb-0000:00:1d.0-1.3/input1
он также как и лог lsusb не меняется
лог lsusb
Bus 002 Device 003: ID 09da:024f A4 Tech Co., Ltd RF Receiver and G6-20D Wireless Optical Mouse
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 064e:a219 Suyin Corp.
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
лог lsusb
Bus 002 Device 003: ID 09da:024f A4 Tech Co., Ltd RF Receiver and G6-20D Wireless Optical Mouse
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 064e:a219 Suyin Corp.
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
вот лог Xorg
[ 35.762]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[ 35.763] X Protocol Version 11, Revision 0
[ 35.763] Build Operating System: Linux 2.6.24-28-server i686 Ubuntu
[ 35.763] Current Operating System: Linux shorenkov 2.6.38-12-generic #51-Ubuntu SMP Wed Sep 28 14:25:20 UTC 2011 i686
[ 35.763] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-12-generic root=UUID=9e5dc293-65b6-4fcb-b3f9-e1839a11b86a ro quiet splash vt.handoff=7
[ 35.763] Build Date: 13 October 2011 05:38:22PM
[ 35.763] xorg-server 2:1.10.1-1ubuntu1.3 (For technical support please see http://www.ubuntu.com/support)
[ 35.763] Current version of pixman: 0.20.2
[ 35.763] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 35.763] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 35.763] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 27 23:02:50 2011
[ 35.763] (==) Using config file: "/etc/X11/xorg.conf"
[ 35.763] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 35.763] (==) No Layout section. Using the first Screen section.
[ 35.763] (**) |-->Screen "Default Screen" (0)
[ 35.763] (**) | |-->Monitor ""
[ 35.766] (==) No monitor specified for screen "Default Screen".
Using a default monitor configuration.
[ 35.766] (==) Automatically adding devices
[ 35.766] (==) Automatically enabling devices
[ 35.766] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 35.766] Entry deleted from font path.
[ 35.766] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 35.766] Entry deleted from font path.
[ 35.766] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 35.766] Entry deleted from font path.
[ 35.766] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 35.766] Entry deleted from font path.
[ 35.766] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 35.766] Entry deleted from font path.
[ 35.766] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 35.766] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 35.766] (==) |-->Input Device "evdev mouse"
[ 35.766] (==) No Layout section. Using the first core pointer device.
[ 35.766] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 35.766] (II) Loader magic: 0x8200ac0
[ 35.766] (II) Module ABI versions:
[ 35.766] X.Org ANSI C Emulation: 0.4
[ 35.766] X.Org Video Driver: 10.0
[ 35.766] X.Org XInput driver : 12.3
[ 35.766] X.Org Server Extension : 5.0
[ 35.767] (--) PCI:*(0:1:0:0) 1002:68e0:1025:036d rev 0, Mem @ 0x80000000/268435456, 0x94000000/131072, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[ 35.767] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 35.767] (II) "extmod" will be loaded by default.
[ 35.767] (II) "dbe" will be loaded by default.
[ 35.767] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 35.767] (II) "record" will be loaded by default.
[ 35.767] (II) "dri" will be loaded by default.
[ 35.767] (II) "dri2" will be loaded by default.
[ 35.767] (II) LoadModule: "glx"
[ 35.768] (II) Loading /usr/lib/xorg/extra-modules/modules/extensions/libglx.so
[ 35.768] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[ 35.768] compiled for 6.9.0, module version = 1.0.0
[ 35.768] (II) Loading extension GLX
[ 35.768] (II) LoadModule: "extmod"
[ 35.782] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 35.782] (II) Module extmod: vendor="X.Org Foundation"
[ 35.782] compiled for 1.10.1, module version = 1.0.0
[ 35.782] Module class: X.Org Server Extension
[ 35.782] ABI class: X.Org Server Extension, version 5.0
[ 35.782] (II) Loading extension MIT-SCREEN-SAVER
[ 35.782] (II) Loading extension XFree86-VidModeExtension
[ 35.782] (II) Loading extension XFree86-DGA
[ 35.782] (II) Loading extension DPMS
[ 35.782] (II) Loading extension XVideo
[ 35.782] (II) Loading extension XVideo-MotionCompensation
[ 35.782] (II) Loading extension X-Resource
[ 35.782] (II) LoadModule: "dbe"
[ 35.783] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 35.783] (II) Module dbe: vendor="X.Org Foundation"
[ 35.783] compiled for 1.10.1, module version = 1.0.0
[ 35.783] Module class: X.Org Server Extension
[ 35.783] ABI class: X.Org Server Extension, version 5.0
[ 35.783] (II) Loading extension DOUBLE-BUFFER
[ 35.783] (II) LoadModule: "record"
[ 35.784] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 35.784] (II) Module record: vendor="X.Org Foundation"
[ 35.784] compiled for 1.10.1, module version = 1.13.0
[ 35.784] Module class: X.Org Server Extension
[ 35.784] ABI class: X.Org Server Extension, version 5.0
[ 35.784] (II) Loading extension RECORD
[ 35.784] (II) LoadModule: "dri"
[ 35.784] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 35.785] (II) Module dri: vendor="X.Org Foundation"
[ 35.785] compiled for 1.10.1, module version = 1.0.0
[ 35.785] ABI class: X.Org Server Extension, version 5.0
[ 35.785] (II) Loading extension XFree86-DRI
[ 35.785] (II) LoadModule: "dri2"
[ 35.785] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 35.785] (II) Module dri2: vendor="X.Org Foundation"
[ 35.785] compiled for 1.10.1, module version = 1.2.0
[ 35.785] ABI class: X.Org Server Extension, version 5.0
[ 35.785] (II) Loading extension DRI2
[ 35.785] (==) Matched fglrx as autoconfigured driver 0
[ 35.785] (==) Matched ati as autoconfigured driver 1
[ 35.785] (==) Matched vesa as autoconfigured driver 2
[ 35.785] (==) Matched fbdev as autoconfigured driver 3
[ 35.785] (==) Assigned the driver to the xf86ConfigLayout
[ 35.785] (II) LoadModule: "fglrx"
[ 35.785] (II) Loading /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so
[ 35.829] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 35.829] compiled for 1.4.99.906, module version = 8.84.60
[ 35.829] Module class: X.Org Video Driver
[ 35.829] (II) Loading sub module "fglrxdrm"
[ 35.829] (II) LoadModule: "fglrxdrm"
[ 35.829] (II) Loading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so
[ 35.829] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 35.829] compiled for 1.4.99.906, module version = 8.84.60
[ 35.829] (II) LoadModule: "ati"
[ 35.830] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 35.830] (II) Module ati: vendor="X.Org Foundation"
[ 35.830] compiled for 1.10.1, module version = 6.14.0
[ 35.830] Module class: X.Org Video Driver
[ 35.830] ABI class: X.Org Video Driver, version 10.0
[ 35.830] (II) LoadModule: "radeon"
[ 35.831] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 35.831] (II) Module radeon: vendor="X.Org Foundation"
[ 35.831] compiled for 1.10.1, module version = 6.14.0
[ 35.831] Module class: X.Org Video Driver
[ 35.831] ABI class: X.Org Video Driver, version 10.0
[ 35.831] (II) LoadModule: "vesa"
[ 35.831] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 35.831] (II) Module vesa: vendor="X.Org Foundation"
[ 35.831] compiled for 1.10.0, module version = 2.3.0
[ 35.831] Module class: X.Org Video Driver
[ 35.831] ABI class: X.Org Video Driver, version 10.0
[ 35.831] (II) LoadModule: "fbdev"
[ 35.832] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 35.832] (II) Module fbdev: vendor="X.Org Foundation"
[ 35.832] compiled for 1.10.0, module version = 0.4.2
[ 35.832] ABI class: X.Org Video Driver, version 10.0
[ 35.832] (II) LoadModule: "evdev"
[ 35.832] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 35.832] (II) Module evdev: vendor="X.Org Foundation"
[ 35.832] compiled for 1.10.0.902, module version = 2.6.0
[ 35.833] Module class: X.Org XInput Driver
[ 35.833] ABI class: X.Org XInput driver, version 12.3
[ 35.833] (II) ATI Proprietary Linux Driver Version Identifier:8.84.60
[ 35.833] (II) ATI Proprietary Linux Driver Release Identifier: 8.84.6
[ 35.833] (II) ATI Proprietary Linux Driver Build Date: Mar 24 2011 19:27:41
[[ 35.839] (II) VESA: driver for VESA chipsets: vesa
[ 35.839] (II) FBDEV: driver for framebuffer: fbdev
[ 35.839] (++) using VT number 7
[ 35.839] (WW) Falling back to old probe method for fglrx
[ 35.845] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 35.846] (--) Assigning device section with no busID to primary device
[ 35.846] (--) Chipset Supported AMD Graphics Processor (0x68E0) found
[ 35.846] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 35.846] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 35.846] (II) AMD Video driver is signed
[ 35.846] (II) Loading /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so
[ 35.846] (II) Loading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so
[ 35.846] (II) fglrx(0): pEnt->device->identifier=0x81f0d66
[ 35.846] (WW) Falling back to old probe method for vesa
[ 35.846] (WW) Falling back to old probe method for fbdev
[ 35.846] (II) Loading sub module "fbdevhw"
[ 35.846] (II) LoadModule: "fbdevhw"
[ 35.847] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 35.847] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 35.847] compiled for 1.10.1, module version = 0.0.2
[ 35.847] ABI class: X.Org Video Driver, version 10.0
[ 35.847] (II) fglrx(0): === [xdl_xs110_atiddxPreInit] === begin
[ 35.847] (II) Loading sub module "vgahw"
[ 35.847] (II) LoadModule: "vgahw"
[ 35.847] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 35.847] (II) Module vgahw: vendor="X.Org Foundation"
[ 35.847] compiled for 1.10.1, module version = 0.1.0
[ 35.847] ABI class: X.Org Video Driver, version 10.0
[ 35.847] (II) fglrx(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
[ 35.847] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 35.847] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 35.847] (==) fglrx(0): Default visual is TrueColor
[ 35.847] (==) fglrx(0): RGB weight 888
[ 35.847] (II) fglrx(0): Using 8 bits per RGB
[ 35.847] (==) fglrx(0): Buffer Tiling is ON
[ 35.848] (II) Loading sub module "fglrxdrm"
[ 35.848] (II) LoadModule: "fglrxdrm"
[ 35.848] (II) Loading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so
[ 35.848] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 35.848] compiled for 1.4.99.906, module version = 8.84.60
[ 35.850] ukiDynamicMajor: found major device number 250
[ 35.850] ukiDynamicMajor: found major device number 250
[ 35.850] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 35.850] ukiOpenDevice: node name is /dev/ati/card0
[ 35.850] ukiOpenDevice: open result is 10, (OK)
[ 35.850] ukiOpenByBusid: ukiOpenMinor returns 10
[ 35.850] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 35.850] (==) fglrx(0): NoAccel = NO
[ 35.850] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 35.850] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 5000 Series" (Chipset = 0x68e0)
[ 35.850] (--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x036d)
[ 35.850] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 35.850] (--) fglrx(0): Linear framebuffer (phys) at 0x80000000
[ 35.850] (--) fglrx(0): MMIO registers at 0x94000000
[ 35.850] (--) fglrx(0): I/O port at 0x00003000
[ 35.850] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 36.548] (II) fglrx(0): ATIF platform detected
[ 37.052] (II) fglrx(0): AC Adapter is used
[ 37.054] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 37.055] (II) Loading sub module "vbe"
[ 37.055] (II) LoadModule: "vbe"
[ 37.055] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 37.055] (II) Module vbe: vendor="X.Org Foundation"
[ 37.055] compiled for 1.10.1, module version = 1.1.0
[ 37.055] ABI class: X.Org Video Driver, version 10.0
[ 37.055] (II) fglrx(0): VESA BIOS detected
[ 37.055] (II) fglrx(0): VESA VBE Version 3.0
[ 37.055] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 37.055] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 37.055] (II) fglrx(0): VESA VBE OEM Software Rev: 12.19
[ 37.055] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 37.055] (II) fglrx(0): VESA VBE OEM Product: PARK
[ 37.055] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 37.084] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 37.084] (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
[ 37.084] (II) fglrx(0): PCIE card detected
[ 37.084] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 37.084] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 37.087] (II) fglrx(0): Using adapter: 1:0.0.
[ 37.117] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[ 37.387] (II) fglrx(0): Interrupt handler installed at IRQ 44.
[ 37.387] (II) fglrx(0): RandR 1.2 support is enabled!
[ 37.387] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 37.387] (==) fglrx(0): Center Mode is disabled
[ 37.387] (II) Loading sub module "fb"
[ 37.387] (II) LoadModule: "fb"
[ 37.388] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 37.388] (II) Module fb: vendor="X.Org Foundation"
[ 37.388] compiled for 1.10.1, module version = 1.0.0
[ 37.388] ABI class: X.Org ANSI C Emulation, version 0.4
[ 37.388] (II) Loading sub module "ddc"
[ 37.388] (II) LoadModule: "ddc"
[ 37.388] (II) Module "ddc" already built-in
[ 37.479] (II) fglrx(0): Finished Initialize PPLIB!
[ 37.480] (II) fglrx(0): Output LVDS has no monitor section
[ 37.480] (II) fglrx(0): Output DFP1 has no monitor section
[ 37.480] (II) fglrx(0): Output CRT1 has no monitor section
[ 37.480] (II) Loading sub module "ddc"
[ 37.480] (II) LoadModule: "ddc"
[ 37.480] (II) Module "ddc" already built-in
[ 37.480] (II) fglrx(0): Connected Display0: LVDS
[ 37.480] (II) fglrx(0): Display0 EDID data ---------------------------
[ 37.480] (II) fglrx(0): Manufacturer: SEC Model: 3046 Serial#: 0
[ 37.480] (II) fglrx(0): Year: 2008 Week: 0
[ 37.480] (II) fglrx(0): EDID Version: 1.3
[ 37.480] (II) fglrx(0): Digital Display Input
[ 37.480] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 37.480] (II) fglrx(0): Gamma: 2.20
[ 37.480] (II) fglrx(0): No DPMS capabilities specified
[ 37.480] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 37.480] (II) fglrx(0): First detailed timing is preferred mode
[ 37.480] (II) fglrx(0): redX: 0.620 redY: 0.355 greenX: 0.300 greenY: 0.580
[ 37.480] (II) fglrx(0): blueX: 0.150 blueY: 0.090 whiteX: 0.313 whiteY: 0.329
[ 37.480] (II) fglrx(0): Manufacturer's mask: 0
[ 37.480] (II) fglrx(0): Supported detailed timing:
[ 37.480] (II) fglrx(0): clock: 72.3 MHz Image Size: 344 x 193 mm
[ 37.480] (II) fglrx(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0
[ 37.480] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 790 v_border: 0
[ 37.480] (II) fglrx(0): Unknown vendor-specific block f
[ 37.480] (II) fglrx(0): SAMSUNG
[ 37.480] (II) fglrx(0): 156AT01-A01
[ 37.480] (II) fglrx(0): EDID (in hex):
[ 37.480] (II) fglrx(0): 00ffffffffffff004ca3463000000000
[ 37.480] (II) fglrx(0): 00120103802213780ace859e5b4c9426
[ 37.480] (II) fglrx(0): 17505400000001010101010101010101
[ 37.480] (II) fglrx(0): 010101010101411c56a0500016303020
[ 37.480] (II) fglrx(0): 250058c1100000190000000f00000000
[ 37.480] (II) fglrx(0): 00000000001eb4027400000000fe0053
[ 37.480] (II) fglrx(0): 414d53554e470a2020202020000000fe
[ 37.480] (II) fglrx(0): 00313536415430312d4130310a2000f1
[ 37.480] (II) fglrx(0): End of Display0 EDID data --------------------
[ 37.486] (II) fglrx(0): EDID for output LVDS
[ 37.486] (II) fglrx(0): Manufacturer: SEC Model: 3046 Serial#: 0
[ 37.486] (II) fglrx(0): Year: 2008 Week: 0
[ 37.487] (II) fglrx(0): EDID Version: 1.3
[ 37.487] (II) fglrx(0): Digital Display Input
[ 37.487] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 37.487] (II) fglrx(0): Gamma: 2.20
[ 37.487] (II) fglrx(0): No DPMS capabilities specified
[ 37.487] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 37.487] (II) fglrx(0): First detailed timing is preferred mode
[ 37.487] (II) fglrx(0): redX: 0.620 redY: 0.355 greenX: 0.300 greenY: 0.580
[ 37.487] (II) fglrx(0): blueX: 0.150 blueY: 0.090 whiteX: 0.313 whiteY: 0.329
[ 37.487] (II) fglrx(0): Manufacturer's mask: 0
[ 37.487] (II) fglrx(0): Supported detailed timing:
[ 37.487] (II) fglrx(0): clock: 72.3 MHz Image Size: 344 x 193 mm
[ 37.487] (II) fglrx(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0
[ 37.487] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 790 v_border: 0
[ 37.487] (II) fglrx(0): Unknown vendor-specific block f
[ 37.487] (II) fglrx(0): SAMSUNG
[ 37.487] (II) fglrx(0): 156AT01-A01
[ 37.487] (II) fglrx(0): EDID (in hex):
[ 37.487] (II) fglrx(0): 00000000782830293a20556e6b6e6f77
[ 37.487] (II) fglrx(0): 6e2076656e646f722d73706563696669
[ 37.487] (II) fglrx(0): 6320626c6f636b202568780a00642025
[ 37.487] (II) fglrx(0): 6920765f626c616e6b696e6721000000
[ 37.487] (II) fglrx(0): 00000000782830293a200925730a0000
[ 37.487] (II) fglrx(0): f0535300f05353000000000029000000
[ 37.487] (II) fglrx(0): 00000000782830293a20454449442028
[ 37.487] (II) fglrx(0): 696e20686578293a0a00673a0a006564
[ 37.487] (II) fglrx(0): EDID vendor "SEC", prod id 12358
[ 37.487] (II) fglrx(0): Printing DDC gathered Modelines:
[ 37.487] (II) fglrx(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz)
[ 37.487] (II) fglrx(0): Printing probed modes for output LVDS
[ 37.487] (II) fglrx(0): Modeline "1366x768"x60.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz)
[ 37.487] (II) fglrx(0): Modeline "1360x768"x60.0 72.33 1360 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz)
[ 37.487] (II) fglrx(0): Modeline "1280x768"x60.0 72.33 1280 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz)
[ 37.487] (II) fglrx(0): Modeline "1280x720"x60.0 72.33 1280 1414 1446 1526 720 770 775 790 -hsync -vsync (47.4 kHz)
[ 37.487] (II) fglrx(0): Modeline "1024x768"x60.0 72.33 1024 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz)
[ 37.487] (II) fglrx(0): Modeline "1024x600"x60.0 72.33 1024 1414 1446 1526 600 770 775 790 -hsync -vsync (47.4 kHz)
[ 37.487] (II) fglrx(0): Modeline "800x600"x60.0 72.33 800 1414 1446 1526 600 770 775 790 -hsync -vsync (47.4 kHz)
[ 37.487] (II) fglrx(0): Modeline "800x480"x60.0 72.33 800 1414 1446 1526 480 770 775 790 -hsync -vsync (47.4 kHz)
[ 37.487] (II) fglrx(0): Modeline "640x480"x60.0 72.33 640 1414 1446 1526 480 770 775 790 -hsync -vsync (47.4 kHz)
[ 37.487] (II) fglrx(0): EDID for output DFP1
[ 37.487] (II) fglrx(0): EDID for output CRT1
[ 37.487] (II) fglrx(0): Output LVDS connected
[ 37.487] (II) fglrx(0): Output DFP1 disconnected
[ 37.487] (II) fglrx(0): Output CRT1 disconnected
[ 37.487] (II) fglrx(0): Using exact sizes for initial modes
[ 37.487] (II) fglrx(0): Output LVDS using initial mode 1366x768
[ 37.487] (II) fglrx(0): Display dimensions: (340, 190) mm
[ 37.487] (II) fglrx(0): DPI set to (102, 102)
[ 37.487] (II) fglrx(0): Adapter ATI Mobility Radeon HD 5000 Series has 2 configurable heads and 1 displays connected.
[ 37.487] (==) fglrx(0): PseudoColor visuals disabled
[ 37.487] (II) Loading sub module "ramdac"
[ 37.487] (II) LoadModule: "ramdac"
[ 37.487] (II) Module "ramdac" already built-in
[ 37.487] (==) fglrx(0): NoDRI = NO
[ 37.487] (==) fglrx(0): Capabilities: 0x00000000
[ 37.487] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 37.487] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 37.487] (==) fglrx(0): UseFastTLS=0
[ 37.487] (==) fglrx(0): BlockSignalsOnLock=1
[ 37.487] (II) UnloadModule: "radeon"
[ 37.487] (II) Unloading radeon
[ 37.487] (II) UnloadModule: "vesa"
[ 37.487] (II) Unloading vesa
[ 37.488] (II) UnloadModule: "fbdev"
[ 37.488] (II) Unloading fbdev
[ 37.488] (II) UnloadModule: "fbdevhw"
[ 37.488] (II) Unloading fbdevhw
[ 37.488] (--) Depth 24 pixmap format is 32 bpp
[ 37.488] (II) Loading extension ATIFGLRXDRI
[ 37.488] (II) fglrx(0): doing swlDriScreenInit
[ 37.488] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 37.488] ukiDynamicMajor: found major device number 250
[ 37.488] ukiDynamicMajor: found major device number 250
[ 37.488] ukiDynamicMajor: found major device number 250
[ 37.488] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 37.488] ukiOpenDevice: node name is /dev/ati/card0
[ 37.488] ukiOpenDevice: open result is 15, (OK)
[ 37.488] ukiOpenByBusid: ukiOpenMinor returns 15
[ 37.488] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 37.488] (II) fglrx(0): [uki] DRM interface version 1.0
[ 37.488] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 37.488] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 37.488] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0xb7852000
[ 37.488] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 37.488] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 37.488] (II) fglrx(0): swlDriScreenInit done
[ 37.488] (II) fglrx(0): Kernel Module Version Information:
[ 37.488] (II) fglrx(0): Name: fglrx
[ 37.488] (II) fglrx(0): Version: 8.84.60
[ 37.488] (II) fglrx(0): Date: Mar 24 2011
[ 37.488] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 37.488] (II) fglrx(0): Kernel Module version matches driver.
[ 37.488] (II) fglrx(0): Kernel Module Build Time Information:
[ 37.488] (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.38-12-generic
[ 37.488] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 37.488] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 37.488] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 37.488] (II) fglrx(0): [uki] register handle = 0x00004000
[ 37.504] (II) fglrx(0): DRI initialization successfull
[ 37.504] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01004000
[ 37.504] (==) fglrx(0): Backing store disabled
[ 37.504] (II) Loading extension FGLRXEXTENSION
[ 37.504] (==) fglrx(0): DPMS enabled
[ 37.505] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 37.505] (**) fglrx(0): Textured Video is enabled.
[ 37.505] (II) LoadModule: "glesx"
[ 37.505] (II) Loading /usr/lib/xorg/extra-modules/modules/glesx.so
[ 37.506] (II) Module glesx: vendor="X.Org Foundation"
[ 37.506] compiled for 1.4.99.906, module version = 1.0.0
[ 37.506] (II) Loading extension GLESX
[ 37.506] (II) fglrx(0): GLESX enableFlags = 592
[ 37.506] (II) fglrx(0): GLESX is enabled
[ 37.506] (II) LoadModule: "amdxmm"
[ 37.506] (II) Loading /usr/lib/xorg/extra-modules/modules/amdxmm.so
[ 37.506] (II) Module amdxmm: vendor="X.Org Foundation"
[ 37.506] compiled for 1.4.99.906, module version = 2.0.0
[ 37.515] (II) Loading extension AMDXVOPL
[ 37.515] (II) Loading extension AMDXVBA
[ 37.516] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 37.517] (II) fglrx(0): Enable composite support successfully
[ 37.517] (II) fglrx(0): X context handle = 0x1
[ 37.517] (II) fglrx(0): [DRI] installation complete
[ 37.518] (==) fglrx(0): Silken mouse enabled
[ 37.518] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 37.518] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 37.518] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[ 37.518] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[ 39.678] (--) RandR disabled
[ 39.678] (II) Initializing built-in extension Generic Event Extension
[ 39.678] (II) Initializing built-in extension SHAPE
[ 39.678] (II) Initializing built-in extension MIT-SHM
[ 39.678] (II) Initializing built-in extension XInputExtension
[ 39.678] (II) Initializing built-in extension XTEST
[ 39.678] (II) Initializing built-in extension BIG-REQUESTS
[ 39.678] (II) Initializing built-in extension SYNC
[ 39.678] (II) Initializing built-in extension XKEYBOARD
[ 39.678] (II) Initializing built-in extension XC-MISC
[ 39.678] (II) Initializing built-in extension SECURITY
[ 39.678] (II) Initializing built-in extension XINERAMA
[ 39.678] (II) Initializing built-in extension XFIXES
[ 39.678] (II) Initializing built-in extension RENDER
[ 39.678] (II) Initializing built-in extension RANDR
[ 39.678] (II) Initializing built-in extension COMPOSITE
[ 39.678] (II) Initializing built-in extension DAMAGE
[ 39.678] (II) Initializing built-in extension GESTURE
[ 39.702] ukiDynamicMajor: found major device number 250
[ 39.702] ukiDynamicMajor: found major device number 250
[ 39.702] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 39.702] ukiOpenDevice: node name is /dev/ati/card0
[ 39.702] ukiOpenDevice: open result is 17, (OK)
[ 39.702] ukiOpenByBusid: ukiOpenMinor returns 17
[ 39.702] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 39.790] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 39.791] (II) fglrx(0): Enable the clock gating!
[ 39.791] (II) fglrx(0): Setting screen physical size to 361 x 203
[ 39.802] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 39.803] (II) Using input driver 'evdev' for 'evdev mouse'
[ 39.803] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 39.803] (**) Option "CorePointer"
[ 39.803] (**) evdev mouse: always reports core events
[ 39.803] (**) evdev mouse: Device: "/dev/input/event9"
[ 39.803] (EE) evdev mouse: Couldn't open mtdev device
[ 39.803] (EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
X.Org X Server 1.10.1
Release Date: 2011-04-15
[ 35.763] X Protocol Version 11, Revision 0
[ 35.763] Build Operating System: Linux 2.6.24-28-server i686 Ubuntu
[ 35.763] Current Operating System: Linux shorenkov 2.6.38-12-generic #51-Ubuntu SMP Wed Sep 28 14:25:20 UTC 2011 i686
[ 35.763] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-12-generic root=UUID=9e5dc293-65b6-4fcb-b3f9-e1839a11b86a ro quiet splash vt.handoff=7
[ 35.763] Build Date: 13 October 2011 05:38:22PM
[ 35.763] xorg-server 2:1.10.1-1ubuntu1.3 (For technical support please see http://www.ubuntu.com/support)
[ 35.763] Current version of pixman: 0.20.2
[ 35.763] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 35.763] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 35.763] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 27 23:02:50 2011
[ 35.763] (==) Using config file: "/etc/X11/xorg.conf"
[ 35.763] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 35.763] (==) No Layout section. Using the first Screen section.
[ 35.763] (**) |-->Screen "Default Screen" (0)
[ 35.763] (**) | |-->Monitor ""
[ 35.766] (==) No monitor specified for screen "Default Screen".
Using a default monitor configuration.
[ 35.766] (==) Automatically adding devices
[ 35.766] (==) Automatically enabling devices
[ 35.766] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 35.766] Entry deleted from font path.
[ 35.766] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 35.766] Entry deleted from font path.
[ 35.766] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 35.766] Entry deleted from font path.
[ 35.766] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 35.766] Entry deleted from font path.
[ 35.766] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 35.766] Entry deleted from font path.
[ 35.766] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 35.766] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 35.766] (==) |-->Input Device "evdev mouse"
[ 35.766] (==) No Layout section. Using the first core pointer device.
[ 35.766] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 35.766] (II) Loader magic: 0x8200ac0
[ 35.766] (II) Module ABI versions:
[ 35.766] X.Org ANSI C Emulation: 0.4
[ 35.766] X.Org Video Driver: 10.0
[ 35.766] X.Org XInput driver : 12.3
[ 35.766] X.Org Server Extension : 5.0
[ 35.767] (--) PCI:*(0:1:0:0) 1002:68e0:1025:036d rev 0, Mem @ 0x80000000/268435456, 0x94000000/131072, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[ 35.767] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 35.767] (II) "extmod" will be loaded by default.
[ 35.767] (II) "dbe" will be loaded by default.
[ 35.767] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 35.767] (II) "record" will be loaded by default.
[ 35.767] (II) "dri" will be loaded by default.
[ 35.767] (II) "dri2" will be loaded by default.
[ 35.767] (II) LoadModule: "glx"
[ 35.768] (II) Loading /usr/lib/xorg/extra-modules/modules/extensions/libglx.so
[ 35.768] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[ 35.768] compiled for 6.9.0, module version = 1.0.0
[ 35.768] (II) Loading extension GLX
[ 35.768] (II) LoadModule: "extmod"
[ 35.782] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 35.782] (II) Module extmod: vendor="X.Org Foundation"
[ 35.782] compiled for 1.10.1, module version = 1.0.0
[ 35.782] Module class: X.Org Server Extension
[ 35.782] ABI class: X.Org Server Extension, version 5.0
[ 35.782] (II) Loading extension MIT-SCREEN-SAVER
[ 35.782] (II) Loading extension XFree86-VidModeExtension
[ 35.782] (II) Loading extension XFree86-DGA
[ 35.782] (II) Loading extension DPMS
[ 35.782] (II) Loading extension XVideo
[ 35.782] (II) Loading extension XVideo-MotionCompensation
[ 35.782] (II) Loading extension X-Resource
[ 35.782] (II) LoadModule: "dbe"
[ 35.783] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 35.783] (II) Module dbe: vendor="X.Org Foundation"
[ 35.783] compiled for 1.10.1, module version = 1.0.0
[ 35.783] Module class: X.Org Server Extension
[ 35.783] ABI class: X.Org Server Extension, version 5.0
[ 35.783] (II) Loading extension DOUBLE-BUFFER
[ 35.783] (II) LoadModule: "record"
[ 35.784] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 35.784] (II) Module record: vendor="X.Org Foundation"
[ 35.784] compiled for 1.10.1, module version = 1.13.0
[ 35.784] Module class: X.Org Server Extension
[ 35.784] ABI class: X.Org Server Extension, version 5.0
[ 35.784] (II) Loading extension RECORD
[ 35.784] (II) LoadModule: "dri"
[ 35.784] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 35.785] (II) Module dri: vendor="X.Org Foundation"
[ 35.785] compiled for 1.10.1, module version = 1.0.0
[ 35.785] ABI class: X.Org Server Extension, version 5.0
[ 35.785] (II) Loading extension XFree86-DRI
[ 35.785] (II) LoadModule: "dri2"
[ 35.785] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 35.785] (II) Module dri2: vendor="X.Org Foundation"
[ 35.785] compiled for 1.10.1, module version = 1.2.0
[ 35.785] ABI class: X.Org Server Extension, version 5.0
[ 35.785] (II) Loading extension DRI2
[ 35.785] (==) Matched fglrx as autoconfigured driver 0
[ 35.785] (==) Matched ati as autoconfigured driver 1
[ 35.785] (==) Matched vesa as autoconfigured driver 2
[ 35.785] (==) Matched fbdev as autoconfigured driver 3
[ 35.785] (==) Assigned the driver to the xf86ConfigLayout
[ 35.785] (II) LoadModule: "fglrx"
[ 35.785] (II) Loading /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so
[ 35.829] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 35.829] compiled for 1.4.99.906, module version = 8.84.60
[ 35.829] Module class: X.Org Video Driver
[ 35.829] (II) Loading sub module "fglrxdrm"
[ 35.829] (II) LoadModule: "fglrxdrm"
[ 35.829] (II) Loading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so
[ 35.829] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 35.829] compiled for 1.4.99.906, module version = 8.84.60
[ 35.829] (II) LoadModule: "ati"
[ 35.830] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 35.830] (II) Module ati: vendor="X.Org Foundation"
[ 35.830] compiled for 1.10.1, module version = 6.14.0
[ 35.830] Module class: X.Org Video Driver
[ 35.830] ABI class: X.Org Video Driver, version 10.0
[ 35.830] (II) LoadModule: "radeon"
[ 35.831] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 35.831] (II) Module radeon: vendor="X.Org Foundation"
[ 35.831] compiled for 1.10.1, module version = 6.14.0
[ 35.831] Module class: X.Org Video Driver
[ 35.831] ABI class: X.Org Video Driver, version 10.0
[ 35.831] (II) LoadModule: "vesa"
[ 35.831] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 35.831] (II) Module vesa: vendor="X.Org Foundation"
[ 35.831] compiled for 1.10.0, module version = 2.3.0
[ 35.831] Module class: X.Org Video Driver
[ 35.831] ABI class: X.Org Video Driver, version 10.0
[ 35.831] (II) LoadModule: "fbdev"
[ 35.832] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 35.832] (II) Module fbdev: vendor="X.Org Foundation"
[ 35.832] compiled for 1.10.0, module version = 0.4.2
[ 35.832] ABI class: X.Org Video Driver, version 10.0
[ 35.832] (II) LoadModule: "evdev"
[ 35.832] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 35.832] (II) Module evdev: vendor="X.Org Foundation"
[ 35.832] compiled for 1.10.0.902, module version = 2.6.0
[ 35.833] Module class: X.Org XInput Driver
[ 35.833] ABI class: X.Org XInput driver, version 12.3
[ 35.833] (II) ATI Proprietary Linux Driver Version Identifier:8.84.60
[ 35.833] (II) ATI Proprietary Linux Driver Release Identifier: 8.84.6
[ 35.833] (II) ATI Proprietary Linux Driver Build Date: Mar 24 2011 19:27:41
[[ 35.839] (II) VESA: driver for VESA chipsets: vesa
[ 35.839] (II) FBDEV: driver for framebuffer: fbdev
[ 35.839] (++) using VT number 7
[ 35.839] (WW) Falling back to old probe method for fglrx
[ 35.845] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 35.846] (--) Assigning device section with no busID to primary device
[ 35.846] (--) Chipset Supported AMD Graphics Processor (0x68E0) found
[ 35.846] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 35.846] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 35.846] (II) AMD Video driver is signed
[ 35.846] (II) Loading /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so
[ 35.846] (II) Loading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so
[ 35.846] (II) fglrx(0): pEnt->device->identifier=0x81f0d66
[ 35.846] (WW) Falling back to old probe method for vesa
[ 35.846] (WW) Falling back to old probe method for fbdev
[ 35.846] (II) Loading sub module "fbdevhw"
[ 35.846] (II) LoadModule: "fbdevhw"
[ 35.847] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 35.847] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 35.847] compiled for 1.10.1, module version = 0.0.2
[ 35.847] ABI class: X.Org Video Driver, version 10.0
[ 35.847] (II) fglrx(0): === [xdl_xs110_atiddxPreInit] === begin
[ 35.847] (II) Loading sub module "vgahw"
[ 35.847] (II) LoadModule: "vgahw"
[ 35.847] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 35.847] (II) Module vgahw: vendor="X.Org Foundation"
[ 35.847] compiled for 1.10.1, module version = 0.1.0
[ 35.847] ABI class: X.Org Video Driver, version 10.0
[ 35.847] (II) fglrx(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
[ 35.847] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 35.847] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 35.847] (==) fglrx(0): Default visual is TrueColor
[ 35.847] (==) fglrx(0): RGB weight 888
[ 35.847] (II) fglrx(0): Using 8 bits per RGB
[ 35.847] (==) fglrx(0): Buffer Tiling is ON
[ 35.848] (II) Loading sub module "fglrxdrm"
[ 35.848] (II) LoadModule: "fglrxdrm"
[ 35.848] (II) Loading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so
[ 35.848] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 35.848] compiled for 1.4.99.906, module version = 8.84.60
[ 35.850] ukiDynamicMajor: found major device number 250
[ 35.850] ukiDynamicMajor: found major device number 250
[ 35.850] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 35.850] ukiOpenDevice: node name is /dev/ati/card0
[ 35.850] ukiOpenDevice: open result is 10, (OK)
[ 35.850] ukiOpenByBusid: ukiOpenMinor returns 10
[ 35.850] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 35.850] (==) fglrx(0): NoAccel = NO
[ 35.850] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 35.850] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 5000 Series" (Chipset = 0x68e0)
[ 35.850] (--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x036d)
[ 35.850] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 35.850] (--) fglrx(0): Linear framebuffer (phys) at 0x80000000
[ 35.850] (--) fglrx(0): MMIO registers at 0x94000000
[ 35.850] (--) fglrx(0): I/O port at 0x00003000
[ 35.850] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 36.548] (II) fglrx(0): ATIF platform detected
[ 37.052] (II) fglrx(0): AC Adapter is used
[ 37.054] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 37.055] (II) Loading sub module "vbe"
[ 37.055] (II) LoadModule: "vbe"
[ 37.055] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 37.055] (II) Module vbe: vendor="X.Org Foundation"
[ 37.055] compiled for 1.10.1, module version = 1.1.0
[ 37.055] ABI class: X.Org Video Driver, version 10.0
[ 37.055] (II) fglrx(0): VESA BIOS detected
[ 37.055] (II) fglrx(0): VESA VBE Version 3.0
[ 37.055] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 37.055] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 37.055] (II) fglrx(0): VESA VBE OEM Software Rev: 12.19
[ 37.055] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 37.055] (II) fglrx(0): VESA VBE OEM Product: PARK
[ 37.055] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 37.084] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 37.084] (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
[ 37.084] (II) fglrx(0): PCIE card detected
[ 37.084] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 37.084] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 37.087] (II) fglrx(0): Using adapter: 1:0.0.
[ 37.117] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[ 37.387] (II) fglrx(0): Interrupt handler installed at IRQ 44.
[ 37.387] (II) fglrx(0): RandR 1.2 support is enabled!
[ 37.387] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 37.387] (==) fglrx(0): Center Mode is disabled
[ 37.387] (II) Loading sub module "fb"
[ 37.387] (II) LoadModule: "fb"
[ 37.388] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 37.388] (II) Module fb: vendor="X.Org Foundation"
[ 37.388] compiled for 1.10.1, module version = 1.0.0
[ 37.388] ABI class: X.Org ANSI C Emulation, version 0.4
[ 37.388] (II) Loading sub module "ddc"
[ 37.388] (II) LoadModule: "ddc"
[ 37.388] (II) Module "ddc" already built-in
[ 37.479] (II) fglrx(0): Finished Initialize PPLIB!
[ 37.480] (II) fglrx(0): Output LVDS has no monitor section
[ 37.480] (II) fglrx(0): Output DFP1 has no monitor section
[ 37.480] (II) fglrx(0): Output CRT1 has no monitor section
[ 37.480] (II) Loading sub module "ddc"
[ 37.480] (II) LoadModule: "ddc"
[ 37.480] (II) Module "ddc" already built-in
[ 37.480] (II) fglrx(0): Connected Display0: LVDS
[ 37.480] (II) fglrx(0): Display0 EDID data ---------------------------
[ 37.480] (II) fglrx(0): Manufacturer: SEC Model: 3046 Serial#: 0
[ 37.480] (II) fglrx(0): Year: 2008 Week: 0
[ 37.480] (II) fglrx(0): EDID Version: 1.3
[ 37.480] (II) fglrx(0): Digital Display Input
[ 37.480] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 37.480] (II) fglrx(0): Gamma: 2.20
[ 37.480] (II) fglrx(0): No DPMS capabilities specified
[ 37.480] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 37.480] (II) fglrx(0): First detailed timing is preferred mode
[ 37.480] (II) fglrx(0): redX: 0.620 redY: 0.355 greenX: 0.300 greenY: 0.580
[ 37.480] (II) fglrx(0): blueX: 0.150 blueY: 0.090 whiteX: 0.313 whiteY: 0.329
[ 37.480] (II) fglrx(0): Manufacturer's mask: 0
[ 37.480] (II) fglrx(0): Supported detailed timing:
[ 37.480] (II) fglrx(0): clock: 72.3 MHz Image Size: 344 x 193 mm
[ 37.480] (II) fglrx(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0
[ 37.480] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 790 v_border: 0
[ 37.480] (II) fglrx(0): Unknown vendor-specific block f
[ 37.480] (II) fglrx(0): SAMSUNG
[ 37.480] (II) fglrx(0): 156AT01-A01
[ 37.480] (II) fglrx(0): EDID (in hex):
[ 37.480] (II) fglrx(0): 00ffffffffffff004ca3463000000000
[ 37.480] (II) fglrx(0): 00120103802213780ace859e5b4c9426
[ 37.480] (II) fglrx(0): 17505400000001010101010101010101
[ 37.480] (II) fglrx(0): 010101010101411c56a0500016303020
[ 37.480] (II) fglrx(0): 250058c1100000190000000f00000000
[ 37.480] (II) fglrx(0): 00000000001eb4027400000000fe0053
[ 37.480] (II) fglrx(0): 414d53554e470a2020202020000000fe
[ 37.480] (II) fglrx(0): 00313536415430312d4130310a2000f1
[ 37.480] (II) fglrx(0): End of Display0 EDID data --------------------
[ 37.486] (II) fglrx(0): EDID for output LVDS
[ 37.486] (II) fglrx(0): Manufacturer: SEC Model: 3046 Serial#: 0
[ 37.486] (II) fglrx(0): Year: 2008 Week: 0
[ 37.487] (II) fglrx(0): EDID Version: 1.3
[ 37.487] (II) fglrx(0): Digital Display Input
[ 37.487] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 37.487] (II) fglrx(0): Gamma: 2.20
[ 37.487] (II) fglrx(0): No DPMS capabilities specified
[ 37.487] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 37.487] (II) fglrx(0): First detailed timing is preferred mode
[ 37.487] (II) fglrx(0): redX: 0.620 redY: 0.355 greenX: 0.300 greenY: 0.580
[ 37.487] (II) fglrx(0): blueX: 0.150 blueY: 0.090 whiteX: 0.313 whiteY: 0.329
[ 37.487] (II) fglrx(0): Manufacturer's mask: 0
[ 37.487] (II) fglrx(0): Supported detailed timing:
[ 37.487] (II) fglrx(0): clock: 72.3 MHz Image Size: 344 x 193 mm
[ 37.487] (II) fglrx(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0
[ 37.487] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 790 v_border: 0
[ 37.487] (II) fglrx(0): Unknown vendor-specific block f
[ 37.487] (II) fglrx(0): SAMSUNG
[ 37.487] (II) fglrx(0): 156AT01-A01
[ 37.487] (II) fglrx(0): EDID (in hex):
[ 37.487] (II) fglrx(0): 00000000782830293a20556e6b6e6f77
[ 37.487] (II) fglrx(0): 6e2076656e646f722d73706563696669
[ 37.487] (II) fglrx(0): 6320626c6f636b202568780a00642025
[ 37.487] (II) fglrx(0): 6920765f626c616e6b696e6721000000
[ 37.487] (II) fglrx(0): 00000000782830293a200925730a0000
[ 37.487] (II) fglrx(0): f0535300f05353000000000029000000
[ 37.487] (II) fglrx(0): 00000000782830293a20454449442028
[ 37.487] (II) fglrx(0): 696e20686578293a0a00673a0a006564
[ 37.487] (II) fglrx(0): EDID vendor "SEC", prod id 12358
[ 37.487] (II) fglrx(0): Printing DDC gathered Modelines:
[ 37.487] (II) fglrx(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz)
[ 37.487] (II) fglrx(0): Printing probed modes for output LVDS
[ 37.487] (II) fglrx(0): Modeline "1366x768"x60.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz)
[ 37.487] (II) fglrx(0): Modeline "1360x768"x60.0 72.33 1360 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz)
[ 37.487] (II) fglrx(0): Modeline "1280x768"x60.0 72.33 1280 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz)
[ 37.487] (II) fglrx(0): Modeline "1280x720"x60.0 72.33 1280 1414 1446 1526 720 770 775 790 -hsync -vsync (47.4 kHz)
[ 37.487] (II) fglrx(0): Modeline "1024x768"x60.0 72.33 1024 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz)
[ 37.487] (II) fglrx(0): Modeline "1024x600"x60.0 72.33 1024 1414 1446 1526 600 770 775 790 -hsync -vsync (47.4 kHz)
[ 37.487] (II) fglrx(0): Modeline "800x600"x60.0 72.33 800 1414 1446 1526 600 770 775 790 -hsync -vsync (47.4 kHz)
[ 37.487] (II) fglrx(0): Modeline "800x480"x60.0 72.33 800 1414 1446 1526 480 770 775 790 -hsync -vsync (47.4 kHz)
[ 37.487] (II) fglrx(0): Modeline "640x480"x60.0 72.33 640 1414 1446 1526 480 770 775 790 -hsync -vsync (47.4 kHz)
[ 37.487] (II) fglrx(0): EDID for output DFP1
[ 37.487] (II) fglrx(0): EDID for output CRT1
[ 37.487] (II) fglrx(0): Output LVDS connected
[ 37.487] (II) fglrx(0): Output DFP1 disconnected
[ 37.487] (II) fglrx(0): Output CRT1 disconnected
[ 37.487] (II) fglrx(0): Using exact sizes for initial modes
[ 37.487] (II) fglrx(0): Output LVDS using initial mode 1366x768
[ 37.487] (II) fglrx(0): Display dimensions: (340, 190) mm
[ 37.487] (II) fglrx(0): DPI set to (102, 102)
[ 37.487] (II) fglrx(0): Adapter ATI Mobility Radeon HD 5000 Series has 2 configurable heads and 1 displays connected.
[ 37.487] (==) fglrx(0): PseudoColor visuals disabled
[ 37.487] (II) Loading sub module "ramdac"
[ 37.487] (II) LoadModule: "ramdac"
[ 37.487] (II) Module "ramdac" already built-in
[ 37.487] (==) fglrx(0): NoDRI = NO
[ 37.487] (==) fglrx(0): Capabilities: 0x00000000
[ 37.487] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 37.487] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 37.487] (==) fglrx(0): UseFastTLS=0
[ 37.487] (==) fglrx(0): BlockSignalsOnLock=1
[ 37.487] (II) UnloadModule: "radeon"
[ 37.487] (II) Unloading radeon
[ 37.487] (II) UnloadModule: "vesa"
[ 37.487] (II) Unloading vesa
[ 37.488] (II) UnloadModule: "fbdev"
[ 37.488] (II) Unloading fbdev
[ 37.488] (II) UnloadModule: "fbdevhw"
[ 37.488] (II) Unloading fbdevhw
[ 37.488] (--) Depth 24 pixmap format is 32 bpp
[ 37.488] (II) Loading extension ATIFGLRXDRI
[ 37.488] (II) fglrx(0): doing swlDriScreenInit
[ 37.488] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 37.488] ukiDynamicMajor: found major device number 250
[ 37.488] ukiDynamicMajor: found major device number 250
[ 37.488] ukiDynamicMajor: found major device number 250
[ 37.488] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 37.488] ukiOpenDevice: node name is /dev/ati/card0
[ 37.488] ukiOpenDevice: open result is 15, (OK)
[ 37.488] ukiOpenByBusid: ukiOpenMinor returns 15
[ 37.488] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 37.488] (II) fglrx(0): [uki] DRM interface version 1.0
[ 37.488] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 37.488] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 37.488] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0xb7852000
[ 37.488] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 37.488] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 37.488] (II) fglrx(0): swlDriScreenInit done
[ 37.488] (II) fglrx(0): Kernel Module Version Information:
[ 37.488] (II) fglrx(0): Name: fglrx
[ 37.488] (II) fglrx(0): Version: 8.84.60
[ 37.488] (II) fglrx(0): Date: Mar 24 2011
[ 37.488] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 37.488] (II) fglrx(0): Kernel Module version matches driver.
[ 37.488] (II) fglrx(0): Kernel Module Build Time Information:
[ 37.488] (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.38-12-generic
[ 37.488] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 37.488] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 37.488] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 37.488] (II) fglrx(0): [uki] register handle = 0x00004000
[ 37.504] (II) fglrx(0): DRI initialization successfull
[ 37.504] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01004000
[ 37.504] (==) fglrx(0): Backing store disabled
[ 37.504] (II) Loading extension FGLRXEXTENSION
[ 37.504] (==) fglrx(0): DPMS enabled
[ 37.505] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 37.505] (**) fglrx(0): Textured Video is enabled.
[ 37.505] (II) LoadModule: "glesx"
[ 37.505] (II) Loading /usr/lib/xorg/extra-modules/modules/glesx.so
[ 37.506] (II) Module glesx: vendor="X.Org Foundation"
[ 37.506] compiled for 1.4.99.906, module version = 1.0.0
[ 37.506] (II) Loading extension GLESX
[ 37.506] (II) fglrx(0): GLESX enableFlags = 592
[ 37.506] (II) fglrx(0): GLESX is enabled
[ 37.506] (II) LoadModule: "amdxmm"
[ 37.506] (II) Loading /usr/lib/xorg/extra-modules/modules/amdxmm.so
[ 37.506] (II) Module amdxmm: vendor="X.Org Foundation"
[ 37.506] compiled for 1.4.99.906, module version = 2.0.0
[ 37.515] (II) Loading extension AMDXVOPL
[ 37.515] (II) Loading extension AMDXVBA
[ 37.516] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 37.517] (II) fglrx(0): Enable composite support successfully
[ 37.517] (II) fglrx(0): X context handle = 0x1
[ 37.517] (II) fglrx(0): [DRI] installation complete
[ 37.518] (==) fglrx(0): Silken mouse enabled
[ 37.518] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 37.518] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 37.518] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[ 37.518] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[ 39.678] (--) RandR disabled
[ 39.678] (II) Initializing built-in extension Generic Event Extension
[ 39.678] (II) Initializing built-in extension SHAPE
[ 39.678] (II) Initializing built-in extension MIT-SHM
[ 39.678] (II) Initializing built-in extension XInputExtension
[ 39.678] (II) Initializing built-in extension XTEST
[ 39.678] (II) Initializing built-in extension BIG-REQUESTS
[ 39.678] (II) Initializing built-in extension SYNC
[ 39.678] (II) Initializing built-in extension XKEYBOARD
[ 39.678] (II) Initializing built-in extension XC-MISC
[ 39.678] (II) Initializing built-in extension SECURITY
[ 39.678] (II) Initializing built-in extension XINERAMA
[ 39.678] (II) Initializing built-in extension XFIXES
[ 39.678] (II) Initializing built-in extension RENDER
[ 39.678] (II) Initializing built-in extension RANDR
[ 39.678] (II) Initializing built-in extension COMPOSITE
[ 39.678] (II) Initializing built-in extension DAMAGE
[ 39.678] (II) Initializing built-in extension GESTURE
[ 39.702] ukiDynamicMajor: found major device number 250
[ 39.702] ukiDynamicMajor: found major device number 250
[ 39.702] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 39.702] ukiOpenDevice: node name is /dev/ati/card0
[ 39.702] ukiOpenDevice: open result is 17, (OK)
[ 39.702] ukiOpenByBusid: ukiOpenMinor returns 17
[ 39.702] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 39.790] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 39.791] (II) fglrx(0): Enable the clock gating!
[ 39.791] (II) fglrx(0): Setting screen physical size to 361 x 203
[ 39.802] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 39.803] (II) Using input driver 'evdev' for 'evdev mouse'
[ 39.803] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 39.803] (**) Option "CorePointer"
[ 39.803] (**) evdev mouse: always reports core events
[ 39.803] (**) evdev mouse: Device: "/dev/input/event9"
[ 39.803] (EE) evdev mouse: Couldn't open mtdev device
[ 39.803] (EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
Нажатие просто выводит мышь из спящего режима, а для меня этого к сожалению, как я уже писал не достаточно.
какие кнопки? Правую или левую? Пробовал не реагирует, до тех пока не проделаю манипуляций с USB
промахнулся веткой для ответа, ответ ниже :)
Ubuntu 11.04
Определяю сейчас это следующим образом: вставляю usb часть в компьютер и включаю комп, когда загружается gdm мышь не шевелится, вытаскиваю вставляю и все работает.
Кроме того сегодня я решил запускать второй X сервер для игр, так вот после его запуска мышь перестает работать до тех пор, пока я не передерну усб. После этого в этой сесси работает, однако когда я переключаюсь по ctrl+alt+f7 обратно, то мышь снова не работает пока не передернешь.
Если запускаю винду то такого не бывает, мышь всегда работает.
А логи.... Какие логи нужно посмотреть?
Определяю сейчас это следующим образом: вставляю usb часть в компьютер и включаю комп, когда загружается gdm мышь не шевелится, вытаскиваю вставляю и все работает.
Кроме того сегодня я решил запускать второй X сервер для игр, так вот после его запуска мышь перестает работать до тех пор, пока я не передерну усб. После этого в этой сесси работает, однако когда я переключаюсь по ctrl+alt+f7 обратно, то мышь снова не работает пока не передернешь.
Если запускаю винду то такого не бывает, мышь всегда работает.
А логи.... Какие логи нужно посмотреть?
