[dream@my ~]$ ip route list
default dev ppp0  scope link 
10.0.0.1 dev ppp0  proto kernel  scope link  src 10.66.215.55

[dream@my ~]$ ip route list
default dev ppp0  scope link 
10.0.0.1 dev ppp0  proto kernel  scope link  src 10.66.215.55 
92.255.180.34 dev ppp0  scope link  src 10.66.215.55 
192.168.30.254 dev ppp1  proto kernel  scope link  src 192.168.30.217

[dream@my ~]$ sudo cat /etc/ppp/options.pptp
# Lock the port
lock

# Authentication
# We don't need the tunnel server to authenticate itself
noauth

# We won't do PAP, EAP, CHAP, or MSCHAP, but we will accept MSCHAP-V2
# (you may need to remove these refusals if the server is not using MPPE)
#refuse-pap
refuse-eap
refuse-chap
#refuse-mschap

# Compression
# Turn off compression protocols we know won't be used
nobsdcomp
nodeflate

# Encryption
# (There have been multiple versions of PPP with encryption support,
# choose with of the following sections you will use.  Note that MPPE
# requires the use of MSCHAP-V2 during authentication)

# http://ppp.samba.org/ the PPP project version of PPP by Paul Mackarras
# ppp-2.4.2 or later with MPPE only, kernel module ppp_mppe.o
# {{{
# Require MPPE 128-bit encryption
require-mppe-128
# }}}

# http://polbox.com/h/hs001/ fork from PPP project by Jan Dubiec
# ppp-2.4.2 or later with MPPE and MPPC, kernel module ppp_mppe_mppc.o
# {{{
# Require MPPE 128-bit encryption
#mppe required,stateless
# }}}

[dream@my ~]$ sudo cat /etc/ppp/peers/gehtsoft
pty "pptp 92.255.180.34 --nolaunchpppd"
file /etc/ppp/options.pptp
user "***"
nodefaultroute
ipparam "gehtsoft"
logfile /var/log/vpn.log
remotename PPTP
noproxyarp